Multi Jet Water Meter
Multi Jet Dry Type
Size
- DN 15
- DN 20
- DN 25
- DN 32
- DN 40
- DN 50
Body Material
- Brass
- Plastic
Lengths
- Several Lengths & Connections Available on Request
Bridgetech Innovations Multi Jet Water Meter is a turbine super dry water meter for residential applications in various sizes ranging between 15mm to 50mm. The BT Single Jet Water Meters are designed for cold and hot potable water and meet the international standard ISO 4064 Class B.
Features
Bridgetech Innovations Multi Jet Water Meters are manufactured using high quality materials and with top notch precision to give accurate readings and reliability for a long time.
Corrosion Resistance
The meter is manufactured using brass or reinforced polymerized plastic that does not corrode.
Copper Register
With IP68 protection the meter is designed to provide clear and legible readings, frost & freeze resistance.
Magnetic drive
A magnetic force drives the register, providing a sensitive and reliable measurement each and every time.
Inlet Strainer
The BT Multi Jet Water Meter comes equipped with inlet strainer to stop dirt and other particles for durability.
Exterior Resistance
The meter is designed to be unaffected by external magnetic fields, ensuring accurate readings even in challenging environments.
Tamper Proof
The BT Multi Jet Water Meter has complete solid lockable plastic shell for long life and to avoid any type of external tampering.
Application
The Multi Jet Water Meter is a type of water meter used for measuring the volume of cold/hot potable water passing through the pipeline. This is mainly used for residential applications.
Optional Features
- Several Lengths & Connections Available on Request
- Reed Switch Option
- Body Material - Brass / Plastic
Working Conditions
Operating Temperature
- Cold Water - 0.1° C - 50° C
- Hot Water - Up to 90° C
Water Pressure
- ≤ Mpa or 1.6 Mpa
Dimensions
Main Technical Data According to ISO 4064:2003
Standard Compliance
Technical data confirms to ISO 4064 Class B, R80, R100, R125 and R160 standards for horizontal installation.
Installation Requirements
- The meter should be installed in horizontal position with the direction of the flow as indicated by the arrow cast in the meter body with the register face upwards.
- Pipeline must be flushed before installation.
- The meter should be constantly full of water during operation.
Maximum Permissible Error
- In the lower zone from Qmin (Q1) inclusive up to but excluding Qt (Q2) is ±5%
- In the upper zone from Qt(Q2) inclusive up to and including Qmax (Q4) is ±2% cold water meter.
- In the upper zone from Qt (Q2) inclusive up to and including Qmax (Q4) is ±3% (hot water meter).
Pressure Loss Curve
Warranty
All meters will be guaranteed against defects in workmanship and material for a period of 1 year from the date of delivery. Defective meters or parts discovered within this period shall be replaced without charge upon return to the Bridgetech Innovations.
Reach us out
We would love to hear from you. Feel free to reach out using the below details.